DNSOP O. Kolkman Internet-Draft NLnet Labs Obsoletes: 2541 (if approved) R. Gieben Intended status: BCP Expires: September 8, 2009 March 7, 2009 DNSSEC Operational Practices, Version 2 draft-ietf-dnsop-rfc4641bis-01 Status of This Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 8, 2009. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. Kolkman & Gieben Expires September 8, 2009 [Page 1] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Abstract This document describes a set of practices for operating the DNS with security extensions (DNSSEC). The target audience is zone administrators deploying DNSSEC. The document discusses operational aspects of using keys and signatures in the DNS. It discusses issues of key generation, key storage, signature generation, key rollover, and related policies. This document obsoletes RFC 2541, as it covers more operational ground and gives more up-to-date requirements with respect to key sizes and the new DNSSEC specification. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. The Use of the Term 'key' . . . . . . . . . . . . . . . . 5 1.2. Time Definitions . . . . . . . . . . . . . . . . . . . . . 5 2. Keeping the Chain of Trust Intact . . . . . . . . . . . . . . 5 3. Keys Generation and Storage . . . . . . . . . . . . . . . . . 6 3.1. Zone and Key Signing Keys . . . . . . . . . . . . . . . . 6 3.1.1. Motivations for the KSK and ZSK Separation . . . . . . 7 3.1.2. Differentiation for 'High-Level' Zones . . . . . . . . 9 3.2. Key Generation . . . . . . . . . . . . . . . . . . . . . . 9 3.3. Key Effectivity Period . . . . . . . . . . . . . . . . . . 9 3.4. Key Algorithm . . . . . . . . . . . . . . . . . . . . . . 10 3.5. Key Sizes . . . . . . . . . . . . . . . . . . . . . . . . 10 3.6. Private Key Storage . . . . . . . . . . . . . . . . . . . 11 4. Signature Generation, Key Rollover, and Related Policies . . . 12 4.1. Time in DNSSEC . . . . . . . . . . . . . . . . . . . . . . 12 4.1.1. Time Considerations . . . . . . . . . . . . . . . . . 13 4.2. Key Rollovers . . . . . . . . . . . . . . . . . . . . . . 15 4.2.1. Zone Signing Key Rollovers . . . . . . . . . . . . . . 15 4.2.1.1. Pre-Publish Key Rollover . . . . . . . . . . . . . 15 4.2.1.2. Double Signature Zone Signing Key Rollover . . . . 17 4.2.1.3. Pros and Cons of the Schemes . . . . . . . . . . . 19 4.2.2. Key Signing Key Rollovers . . . . . . . . . . . . . . 19 4.2.3. Difference Between ZSK and KSK Rollovers . . . . . . . 21 4.2.4. Key algorithm rollover . . . . . . . . . . . . . . . . 22 4.2.5. Automated Key Rollovers . . . . . . . . . . . . . . . 23 4.3. Planning for Emergency Key Rollover . . . . . . . . . . . 24 Kolkman & Gieben Expires September 8, 2009 [Page 2] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 4.3.1. KSK Compromise . . . . . . . . . . . . . . . . . . . . 24 4.3.1.1. Keeping the Chain of Trust Intact . . . . . . . . 25 4.3.1.2. Breaking the Chain of Trust . . . . . . . . . . . 26 4.3.2. ZSK Compromise . . . . . . . . . . . . . . . . . . . . 26 4.3.3. Compromises of Keys Anchored in Resolvers . . . . . . 26 4.4. Parental Policies . . . . . . . . . . . . . . . . . . . . 27 4.4.1. Initial Key Exchanges and Parental Policies Considerations . . . . . . . . . . . . . . . . . . . . 27 4.4.2. Storing Keys or Hashes? . . . . . . . . . . . . . . . 27 4.4.3. Security Lameness . . . . . . . . . . . . . . . . . . 28 4.4.4. DS Signature Validity Period . . . . . . . . . . . . . 28 4.4.5. (Non) Cooperating Registrars . . . . . . . . . . . . . 29 5. Security Considerations . . . . . . . . . . . . . . . . . . . 30 6. IANA considerations . . . . . . . . . . . . . . . . . . . . . 30 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 30 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 31 8.1. Normative References . . . . . . . . . . . . . . . . . . . 31 8.2. Informative References . . . . . . . . . . . . . . . . . . 31 Appendix A. Terminology . . . . . . . . . . . . . . . . . . . . . 32 Appendix B. Zone Signing Key Rollover How-To . . . . . . . . . . 34 Appendix C. Typographic Conventions . . . . . . . . . . . . . . . 34 Appendix D. Document Editing History . . . . . . . . . . . . . . 37 D.1. draft-ietf-dnsop-rfc4641-00 . . . . . . . . . . . . . . . 37 D.2. version 0->1 . . . . . . . . . . . . . . . . . . . . . . . 37 Kolkman & Gieben Expires September 8, 2009 [Page 3] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 1. Introduction This document describes how to run a DNS Security (DNSSEC)-enabled environment. It is intended for operators who have knowledge of the DNS (see RFC 1034 [1] and RFC 1035 [2]) and want to deploy DNSSEC. See RFC 4033 [3] for an introduction to DNSSEC, RFC 4034 [4] for the newly introduced Resource Records (RRs), and RFC 4035 [5] for the protocol changes. During workshops and early operational deployment tests, operators and system administrators have gained experience about operating the DNS with security extensions (DNSSEC). This document translates these experiences into a set of practices for zone administrators. At the time of writing, there exists very little experience with DNSSEC in production environments; this document should therefore explicitly not be seen as representing 'Best Current Practices'. [OK: Is this document ripe enough to shoot for BCP?] The procedures herein are focused on the maintenance of signed zones (i.e., signing and publishing zones on authoritative servers). It is intended that maintenance of zones such as re-signing or key rollovers be transparent to any verifying clients on the Internet. The structure of this document is as follows. In Section 2, we discuss the importance of keeping the "chain of trust" intact. Aspects of key generation and storage of private keys are discussed in Section 3; the focus in this section is mainly on the private part of the key(s). Section 4 describes considerations concerning the public part of the keys. Since these public keys appear in the DNS one has to take into account all kinds of timing issues, which are discussed in Section 4.1. Section 4.2 and Section 4.3 deal with the rollover, or supercession, of keys. Finally, Section 4.4 discusses considerations on how parents deal with their children's public keys in order to maintain chains of trust. The typographic conventions used in this document are explained in Appendix C. Since this is a document with operational suggestions and there are no protocol specifications, the RFC 2119 [6] language does not apply. This document [OK: when approved] obsoletes RFC 4641 [16]. [OK: Editorial comments and questions are indicated by square brackets and editor innitials] Kolkman & Gieben Expires September 8, 2009 [Page 4] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 1.1. The Use of the Term 'key' It is assumed that the reader is familiar with the concept of asymmetric keys on which DNSSEC is based (public key cryptography RFC4949 [17]). Therefore, this document will use the term 'key' rather loosely. Where it is written that 'a key is used to sign data' it is assumed that the reader understands that it is the private part of the key pair that is used for signing. It is also assumed that the reader understands that the public part of the key pair is published in the DNSKEY Resource Record and that it is the public part that is used in key exchanges. 1.2. Time Definitions In this document, we will be using a number of time-related terms. The following definitions apply: o "Signature validity period" The period that a signature is valid. It starts at the time specified in the signature inception field of the RRSIG RR and ends at the time specified in the expiration field of the RRSIG RR. o "Signature publication period" Time after which a signature (made with a specific key) is replaced with a new signature (made with the same key). This replacement takes place by publishing the relevant RRSIG in the master zone file. After one stops publishing an RRSIG in a zone, it may take a while before the RRSIG has expired from caches and has actually been removed from the DNS. o "Key effectivity period" The period during which a key pair is expected to be effective. This period is defined as the time between the first inception time stamp and the last expiration date of any signature made with this key, regardless of any discontinuity in the use of the key. The key effectivity period can span multiple signature validity periods. o "Maximum/Minimum Zone Time to Live (TTL)" The maximum or minimum value of the TTLs from the complete set of RRs in a zone. Note that the minimum TTL is not the same as the MINIMUM field in the SOA RR. See [9] for more information. 2. Keeping the Chain of Trust Intact Maintaining a valid chain of trust is important because broken chains of trust will result in data being marked as Bogus (as defined in [3] Section 5), which may cause entire (sub)domains to become invisible to verifying clients. The administrators of secured zones have to Kolkman & Gieben Expires September 8, 2009 [Page 5] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 realize that their zone is, to verifying clients, part of a chain of trust. As mentioned in the introduction, the procedures herein are intended to ensure that maintenance of zones, such as re-signing or key rollovers, will be transparent to the verifying clients on the Internet. Administrators of secured zones will have to keep in mind that data published on an authoritative primary server will not be immediately seen by verifying clients; it may take some time for the data to be transferred to other secondary authoritative nameservers and clients may be fetching data from caching non-authoritative servers. In this light, note that the time for a zone transfer from master to slave is negligible when using NOTIFY [8] and incremental transfer (IXFR) [7]. It increases when full zone transfers (AXFR) are used in combination with NOTIFY. It increases even more if you rely on full zone transfers based on only the SOA timing parameters for refresh. For the verifying clients, it is important that data from secured zones can be used to build chains of trust regardless of whether the data came directly from an authoritative server, a caching nameserver, or some middle box. Only by carefully using the available timing parameters can a zone administrator ensure that the data necessary for verification can be obtained. The responsibility for maintaining the chain of trust is shared by administrators of secured zones in the chain of trust. This is most obvious in the case of a 'key compromise' when a trade-off between maintaining a valid chain of trust and replacing the compromised keys as soon as possible must be made. Then zone administrators will have to make a trade-off, between keeping the chain of trust intact -- thereby allowing for attacks with the compromised key -- or deliberately breaking the chain of trust and making secured subdomains invisible to security-aware resolvers. Also see Section 4.3. 3. Keys Generation and Storage This section describes a number of considerations with respect to the security of keys. It deals with the generation, effectivity period, size, and storage of private keys. 3.1. Zone and Key Signing Keys The DNSSEC validation protocol does not distinguish between different types of DNSKEYs. All DNSKEYs can be used during the validation. In practice, operators use Key Signing and Zone Signing Keys and use the Kolkman & Gieben Expires September 8, 2009 [Page 6] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 so-called Secure Entry Point (SEP) [5] flag to distinguish between them during operations. The dynamics and considerations are discussed below. To make zone re-signing and key rollover procedures easier to implement, it is possible to use one or more keys as Key Signing Keys (KSKs). These keys will only sign the apex DNSKEY RRSet in a zone. Other keys can be used to sign all the RRSets in a zone and are referred to as Zone Signing Keys (ZSKs). In this document, we assume that KSKs are the subset of keys that are used for key exchanges with the parent and potentially for configuration as trusted anchors -- the SEP keys. In this document, we assume a one-to-one mapping between KSK and SEP keys and we assume the SEP flag to be set on all KSKs. 3.1.1. Motivations for the KSK and ZSK Separation Differentiating between the KSK and ZSK functions has several advantages: o No parent/child interaction is required when ZSKs are updated. o [OK: Bullet removed, strawman Paul Hoffman] o As the KSK is only used to sign a key set, which is most probably updated less frequently than other data in the zone, it can be stored separately from and in a safer location than the ZSK. o A KSK can have a longer key effectivity period. For almost any method of key management and zone signing, the KSK is used less frequently than the ZSK. Once a key set is signed with the KSK, all the keys in the key set can be used as ZSKs. If a ZSK is compromised, it can be simply dropped from the key set. The new key set is then re-signed with the KSK. Given the assumption that for KSKs the SEP flag is set, the KSK can be distinguished from a ZSK by examining the flag field in the DNSKEY RR. If the flag field is an odd number it is a KSK. If it is an even number it is a ZSK. The Zone Signing Key can be used to sign all the data in a zone on a regular basis. When a Zone Signing Key is to be rolled, no interaction with the parent is needed. This allows for signature validity periods on the order of days. The Key Signing Key is only to be used to sign the DNSKEY RRs in a zone. If a Key Signing Key is to be rolled over, there will be Kolkman & Gieben Expires September 8, 2009 [Page 7] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 interactions with parties other than the zone administrator. If there is a parent zone, these can include the registry of the parent zone or administrators of verifying resolvers that have the particular key configured as secure entry points. If this is a trust anchor, everyone relying on the trust anchor needs to roll over to the new key. The latter may be subject to stability costs if automated trust-anchor rollover mechanisms (such as e.g. RFC5011 [18]) are not in place. Hence, the key effectivity period of these keys can and should be made much longer. There are two schools of thought on rolling a KSK that is not a trust anchor [OK: One can never be sure a KSK is _not_ a trust anchor]: o It should be done regularly (possibly every few months) so that a key rollover remains an operational routine. o It should only be done when it is known or strongly suspected that the key has been compromised in order to reduce the stability issues on systems where the rollover does not happen cleanly. There is no widespread agreement on which of these two schools of thought is better for different deployments of DNSSEC. There is a stability cost every time a non-anchor KSK is rolled over, but it is possibly low if the communication between the child and the parent is good. On the other hand, the only completely effective way to tell if the communication is good is to test it periodically. Thus, rolling a KSK with a parent is only done for two reasons: to test and verify the rolling system to prepare for an emergency, and in the case of an actual emergency. [OK: The paragraph below is a straw-man by Paul Hoffman] Because of the difficulty of getting all users of a trust anchor to replace an old trust anchor with a new one, a KSK that is a trust anchor should never be rolled unless it is known or strongly suspected that the key has been compromised. [OK: This is an alternative straw-man by Olaf Kolkman] The same operational concerns apply to the rollover of KSKs that are used as trust-anchors. Since the administrator of a zone can not be certain that the zone's KSK is in use as a trust-anchor she will have to assume that a rollover will cause a stability cost for the users that did configure her key as a trust-anchor. Those costs can be minimized by automating the rollover RFC5011 [18] and by rolling the key regularly, and advertising such, so that the operators of recursive nameservers will put the appropriate mechanism in place to deal with these stability costs, or, in other words, budget for these costs instead of incuring them unexpectedly. Kolkman & Gieben Expires September 8, 2009 [Page 8] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 3.1.2. Differentiation for 'High-Level' Zones In an earlier version of this document we made a differentiation between KSKs used for zones that are high in the DNS hierarchy versus KSKs used for zones low in that hierarchy. We have come to realize that there are other considerations that argue such differentiation does not need to be made. Longer keys are not useful because the crypto guidance is that everyone should use keys that no one can break. Also, it is impossible to judge which zones are more or less valuable to an attacker. An attack can only be used if the compromise is unnoticed and the attacker can act as an man-in-the-middle attack (MITM) in an unnoticed way. If .example is compromised and the attacker forges answers for somebank.example and sends them out as an MITM, when the attack is discovered it will be simple to prove that .example has been compromised and the KSK will be rolled. Defining a long-term successful attack is difficult for keys at any level. 3.2. Key Generation Careful generation of all keys is a sometimes overlooked but absolutely essential element in any cryptographically secure system. The strongest algorithms used with the longest keys are still of no use if an adversary can guess enough to lower the size of the likely key space so that it can be exhaustively searched. Technical suggestions for the generation of random keys will be found in RFC 4086 [14] and NIST SP 800-900 [20]. One should carefully assess if the random number generator used during key generation adheres to these suggestions. Keys with a long effectivity period are particularly sensitive as they will represent a more valuable target and be subject to attack for a longer time than short-period keys. It is strongly recommended that long-term key generation occur off-line in a manner isolated from the network via an air gap or, at a minimum, high-level secure hardware. 3.3. Key Effectivity Period From a purely operational perspective, a reasonable key effectivity period for KSKs that have a parent zone is 13 months, with the intent to replace them after 12 months. An intended key effectivity period of a month is reasonable for Zone Signing Keys. This annual rollover gives operational practice to rollovers. Ignoring the operational perspective, a reasonable effectivity period for KSKs that have a parent zone is of the order of 2 decades or Kolkman & Gieben Expires September 8, 2009 [Page 9] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 longer. That is, if one does not plan to test the rollover procedure, the key should be effective essentially forever, and then only rolled over in case of emergency. The "operational habit" argument also applies to trust anchor reconfiguration. If a short key effectivity period is used and the trust anchor configuration has to be revisited on a regular basis, the odds that the configuration tends to be forgotten is smaller. The trade-off is against a system that is so dynamic that administrators of the validating clients will not be able to follow the modifications.Note that if a trust anchor replacement is done incorrectly, the entire zone that the trust anchor covers will become bogus until the trust anchor is corrected. Key effectivity periods can be made very short, as in a few minutes. But when replacing keys one has to take the considerations from Section 4.1 and Section 4.2 into account. 3.4. Key Algorithm There are currently two types of signature algorithms that can be used in DNSSEC: RSA and DSA. Both are fully specified in many freely-available documents, and both are widely considered to be patent-free. The creation of signatures wiht RSA and DSA takes roughly the same time, but DSA is about ten times slower for signature verification. We suggest the use of either RSA/SHA-1 or RSA/SHA-256 as the preferred signature algorithms. Both have advantages and disadvantages. RSA/SHA-1 has been deployed for many years, while RSA/SHA-256 has only begun to be deployed. On the other hand, it is expected that if effective attacks on either algorithm appeark, they will appear for RSA/SHA-1 first. RSA/MD5 should not be considered for use because RSA/MD5 will very likely be the first common-use signature algorithm to have an effective attack. At the time of publication, it is known that the SHA-1 hash has cryptanalysis issues. There is work in progress on addressing these issues. We recommend the use of public key algorithms based on hashes stronger than SHA-1 (e.g., SHA-256), as soon as these algorithms are available in protocol specifications (see [21] and [22]) and implementations. 3.5. Key Sizes DNSSEC signing keys should be large enough to avoid all know cryptographic attacks during the lifetime of the key. To date, despite huge efforts, no one has broken a regular 1024-bit key; in Kolkman & Gieben Expires September 8, 2009 [Page 10] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 fact, the best completed attack is estimated to be the equivalent of a 700-bit key. An attacker breaking a 1024-bit signing key would need expend phenominal amounts of networked computing power in a way that would not be detected in order to break a single key. Because of this, it is estimated that most zones can safely use 1024-bit keys for at least the next ten years. A 1024-bit asymmetric key has an approximate equivalent strength of a symmetric 80-bit key. Keys that are used as extremely high value trust anchors, or non- anchor keys that may be difficult to roll over, may want to use lengths longer than 1024 bits. Typically, the next larger key size used is 2048 bits, which have the approximate equivalent strength of a symmetric 112-bit key. In a standard CPU, it takes about four times as long to sign or verify with a 2048-bit key as it does with a 1024-bit key. Another way to decide on the size of key to use is to remember that the phenominal effort it takes for an attacker to break a 1024-bit key is the same regardless of how the key is used. If an attacker has the capability of breaking a 1024-bit DNSSEC key, he also has the capability of breaking one of the many 1024-bit TLS trust anchor keys that are installed with web browsers. If the value of a DNSSEC key is lower to the attacker than the value of a TLS trust anchor, the attacker will use the resources to attack the TLS trust anchor. It is possible that there is a unexpected improvement in the ability for attackers to beak keys, and that such an attack would make it feasible to break 1024-bit keys but not 2048-bit keys. If such an improvement happens, it is likely that there will be a huge amount of publicity, particularly because of the large number of 1024-bit TLS trust anchors build into popular web browsers. At that time, all 1024-bit keys (both ones with parent zones and ones that are trust anchors) can be rolled over and replaced with larger keys. Earlier documents (including the previous version of this document) urged the use of longer keys in situations where a particular key was "heavily used". That advice may have been true 15 years ago, but it is not true today when using RSA or DSA algorithms and keys of 1024 bits or higher. 3.6. Private Key Storage It is recommended that, where possible, zone private keys and the zone file master copy that is to be signed be kept and used in off- line, non-network-connected, physically secure machines only. Periodically, an application can be run to add authentication to a zone by adding RRSIG and NSEC RRs. Then the augmented file can be transferred. Kolkman & Gieben Expires September 8, 2009 [Page 11] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 When relying on dynamic update to manage a signed zone [11], be aware that at least one private key of the zone will have to reside on the master server. This key is only as secure as the amount of exposure the server receives to unknown clients and the security of the host. Although not mandatory, one could administer the DNS in the following way. The master that processes the dynamic updates is unavailable from generic hosts on the Internet, it is not listed in the NS RRSet, although its name appears in the SOA RRs MNAME field. The nameservers in the NS RRSet are able to receive zone updates through NOTIFY, IXFR, AXFR, or an out-of-band distribution mechanism. This approach is known as the "hidden master" setup. The ideal situation is to have a one-way information flow to the network to avoid the possibility of tampering from the network. Keeping the zone master file on-line on the network and simply cycling it through an off-line signer does not do this. The on-line version could still be tampered with if the host it resides on is compromised. For maximum security, the master copy of the zone file should be off-net and should not be updated based on an unsecured network mediated communication. In general, keeping a zone file off-line will not be practical and the machines on which zone files are maintained will be connected to a network. Operators are advised to take security measures to shield unauthorized access to the master copy. For dynamically updated secured zones [11], both the master copy and the private key that is used to update signatures on updated RRs will need to be on-line. 4. Signature Generation, Key Rollover, and Related Policies 4.1. Time in DNSSEC Without DNSSEC, all times in the DNS are relative. The SOA fields REFRESH, RETRY, and EXPIRATION are timers used to determine the time elapsed after a slave server synchronized with a master server. The Time to Live (TTL) value and the SOA RR minimum TTL parameter [9] are used to determine how long a forwarder should cache data after it has been fetched from an authoritative server. By using a signature validity period, DNSSEC introduces the notion of an absolute time in the DNS. Signatures in DNSSEC have an expiration date after which the signature is marked as invalid and the signed data is to be considered Bogus. Kolkman & Gieben Expires September 8, 2009 [Page 12] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 4.1.1. Time Considerations Because of the expiration of signatures, one should consider the following: o We suggest the Maximum Zone TTL of your zone data to be a fraction of your signature validity period. If the TTL would be of similar order as the signature validity period, then all RRSets fetched during the validity period would be cached until the signature expiration time. Section 7.1 of [3] suggests that "the resolver may use the time remaining before expiration of the signature validity period of a signed RRSet as an upper bound for the TTL". As a result, query load on authoritative servers would peak at signature expiration time, as this is also the time at which records simultaneously expire from caches. To avoid query load peaks, we suggest the TTL on all the RRs in your zone to be at least a few times smaller than your signature validity period. o We suggest the signature publication period to end at least one Maximum Zone TTL duration before the end of the signature validity period. Re-signing a zone shortly before the end of the signature validity period may cause simultaneous expiration of data from caches. This in turn may lead to peaks in the load on authoritative servers. o We suggest the Minimum Zone TTL to be long enough to both fetch and verify all the RRs in the trust chain. In workshop environments, it has been demonstrated [19] that a low TTL (under 5 to 10 minutes) caused disruptions because of the following two problems: 1. During validation, some data may expire before the validation is complete. The validator should be able to keep all data until it is completed. This applies to all RRs needed to complete the chain of trust: DSes, DNSKEYs, RRSIGs, and the final answers, i.e., the RRSet that is returned for the initial query. 2. Frequent verification causes load on recursive nameservers. Data at delegation points, DSes, DNSKEYs, and RRSIGs benefit from caching. The TTL on those should be relatively long. Kolkman & Gieben Expires September 8, 2009 [Page 13] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 o Slave servers will need to be able to fetch newly signed zones well before the RRSIGs in the zone served by the slave server pass their signature expiration time. When a slave server is out of sync with its master and data in a zone is signed by expired signatures, it may be better for the slave server not to give out any answer. Normally, a slave server that is not able to contact a master server for an extended period will expire a zone. When that happens, the server will respond differently to queries for that zone. Some servers issue SERVFAIL, whereas others turn off the 'AA' bit in the answers. The time of expiration is set in the SOA record and is relative to the last successful refresh between the master and the slave servers. There exists no coupling between the signature expiration of RRSIGs in the zone and the expire parameter in the SOA. If the server serves a DNSSEC zone, then it may well happen that the signatures expire well before the SOA expiration timer counts down to zero. It is not possible to completely prevent this from happening by tweaking the SOA parameters. However, the effects can be minimized where the SOA expiration time is equal to or shorter than the signature validity period. The consequence of an authoritative server not being able to update a zone, whilst that zone includes expired signatures, is that non-secure resolvers will continue to be able to resolve data served by the particular slave servers while security- aware resolvers will experience problems because of answers being marked as Bogus. We suggest the SOA expiration timer being approximately one third or one fourth of the signature validity period. It will allow problems with transfers from the master server to be noticed before the actual signature times out. We also suggest that operators of nameservers that supply secondary services develop 'watch dogs' to spot upcoming signature expirations in zones they slave, and take appropriate action. When determining the value for the expiration parameter one has to take the following into account: What are the chances that all my secondaries expire the zone? How quickly can I reach an administrator of secondary servers to load a valid zone? These questions are not DNSSEC specific but may influence the choice Kolkman & Gieben Expires September 8, 2009 [Page 14] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 of your signature validity intervals. 4.2. Key Rollovers Regardless of whether a zone uses periodic key rollovers in order to practice for emergencies, or only rolls over keys in an emergency, key rollovers are a fact of life when using DNSSEC. Zone administrators who are in the process of rolling their keys have to take into account that data published in previous versions of their zone still lives in caches. When deploying DNSSEC, this becomes an important consideration; ignoring data that may be in caches may lead to loss of service for clients. The most pressing example of this occurs when zone material signed with an old key is being validated by a resolver that does not have the old zone key cached. If the old key is no longer present in the current zone, this validation fails, marking the data "Bogus". Alternatively, an attempt could be made to validate data that is signed with a new key against an old key that lives in a local cache, also resulting in data being marked "Bogus". 4.2.1. Zone Signing Key Rollovers For "Zone Signing Key rollovers", there are two ways to make sure that during the rollover data still cached can be verified with the new key sets or newly generated signatures can be verified with the keys still in caches. One schema, described in Section 4.2.1.2, uses double signatures; the other uses key pre-publication (Section 4.2.1.1). The pros, cons, and recommendations are described in Section 4.2.1.3. 4.2.1.1. Pre-Publish Key Rollover This section shows how to perform a ZSK rollover without the need to sign all the data in a zone twice -- the "pre-publish key rollover". This method has advantages in the case of a key compromise. If the old key is compromised, the new key has already been distributed in the DNS. The zone administrator is then able to quickly switch to the new key and remove the compromised key from the zone. Another major advantage is that the zone size does not double, as is the case with the double signature ZSK rollover. A small "how-to" for this kind of rollover can be found in Appendix B. Kolkman & Gieben Expires September 8, 2009 [Page 15] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 Pre-publish key rollover involves four stages as follows: ---------------------------------------------------------------- initial new DNSKEY new RRSIGs DNSKEY removal ---------------------------------------------------------------- SOA0 SOA1 SOA2 SOA3 RRSIG10(SOA0) RRSIG10(SOA1) RRSIG11(SOA2) RRSIG11(SOA3) DNSKEY1 DNSKEY1 DNSKEY1 DNSKEY1 DNSKEY10 DNSKEY10 DNSKEY10 DNSKEY11 DNSKEY11 DNSKEY11 RRSIG1 (DNSKEY) RRSIG1 (DNSKEY) RRSIG1(DNSKEY) RRSIG1 (DNSKEY) RRSIG10(DNSKEY) RRSIG10(DNSKEY) RRSIG11(DNSKEY) RRSIG11(DNSKEY) ---------------------------------------------------------------- Pre-Publish Key Rollover initial: Initial version of the zone: DNSKEY 1 is the Key Signing Key. DNSKEY 10 is used to sign all the data of the zone, the Zone Signing Key. new DNSKEY: DNSKEY 11 is introduced into the key set. Note that no signatures are generated with this key yet, but this does not secure against brute force attacks on the public key. The minimum duration of this pre-roll phase is the time it takes for the data to propagate to the authoritative servers plus TTL value of the key set. new RRSIGs: At the "new RRSIGs" stage (SOA serial 2), DNSKEY 11 is used to sign the data in the zone exclusively (i.e., all the signatures from DNSKEY 10 are removed from the zone). DNSKEY 10 remains published in the key set. This way data that was loaded into caches from version 1 of the zone can still be verified with key sets fetched from version 2 of the zone. The minimum time that the key set including DNSKEY 10 is to be published is the time that it takes for zone data from the previous version of the zone to expire from old caches, i.e., the time it takes for this zone to propagate to all authoritative servers plus the Maximum Zone TTL value of any of the data in the previous version of the zone. DNSKEY removal: DNSKEY 10 is removed from the zone. The key set, now only containing DNSKEY 1 and DNSKEY 11, is re-signed with the DNSKEY 1. The above scheme can be simplified by always publishing the "future" key immediately after the rollover. The scheme would look as follows (we show two rollovers); the future key is introduced in "new DNSKEY" Kolkman & Gieben Expires September 8, 2009 [Page 16] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 as DNSKEY 12 and again a newer one, numbered 13, in "new DNSKEY (II)": initial new RRSIGs new DNSKEY ----------------------------------------------------------------- SOA0 SOA1 SOA2 RRSIG10(SOA0) RRSIG11(SOA1) RRSIG11(SOA2) DNSKEY1 DNSKEY1 DNSKEY1 DNSKEY10 DNSKEY10 DNSKEY11 DNSKEY11 DNSKEY11 DNSKEY12 RRSIG1(DNSKEY) RRSIG1 (DNSKEY) RRSIG1(DNSKEY) RRSIG10(DNSKEY) RRSIG11(DNSKEY) RRSIG11(DNSKEY) ---------------------------------------------------------------- ---------------------------------------------------------------- new RRSIGs (II) new DNSKEY (II) ---------------------------------------------------------------- SOA3 SOA4 RRSIG12(SOA3) RRSIG12(SOA4) DNSKEY1 DNSKEY1 DNSKEY11 DNSKEY12 DNSKEY12 DNSKEY13 RRSIG1(DNSKEY) RRSIG1(DNSKEY) RRSIG12(DNSKEY) RRSIG12(DNSKEY) ---------------------------------------------------------------- Pre-Publish Key Rollover, Showing Two Rollovers Note that the key introduced in the "new DNSKEY" phase is not used for production yet; the private key can thus be stored in a physically secure manner and does not need to be 'fetched' every time a zone needs to be signed. 4.2.1.2. Double Signature Zone Signing Key Rollover This section shows how to perform a ZSK key rollover using the double zone data signature scheme, aptly named "double signature rollover". During the "new DNSKEY" stage the new version of the zone file will need to propagate to all authoritative servers and the data that exists in (distant) caches will need to expire, requiring at least the Maximum Zone TTL. Kolkman & Gieben Expires September 8, 2009 [Page 17] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 Double signature ZSK rollover involves three stages as follows: ---------------------------------------------------------------- initial new DNSKEY DNSKEY removal ---------------------------------------------------------------- SOA0 SOA1 SOA2 RRSIG10(SOA0) RRSIG10(SOA1) RRSIG11(SOA2) RRSIG11(SOA1) DNSKEY1 DNSKEY1 DNSKEY1 DNSKEY10 DNSKEY10 DNSKEY11 DNSKEY11 RRSIG1(DNSKEY) RRSIG1(DNSKEY) RRSIG1(DNSKEY) RRSIG10(DNSKEY) RRSIG10(DNSKEY) RRSIG11(DNSKEY) RRSIG11(DNSKEY) ---------------------------------------------------------------- Double Signature Zone Signing Key Rollover initial: Initial Version of the zone: DNSKEY 1 is the Key Signing Key. DNSKEY 10 is used to sign all the data of the zone, the Zone Signing Key. new DNSKEY: At the "New DNSKEY" stage (SOA serial 1) DNSKEY 11 is introduced into the key set and all the data in the zone is signed with DNSKEY 10 and DNSKEY 11. The rollover period will need to continue until all data from version 0 of the zone has expired from remote caches. This will take at least the Maximum Zone TTL of version 0 of the zone. DNSKEY removal: DNSKEY 10 is removed from the zone. All the signatures from DNSKEY 10 are removed from the zone. The key set, now only containing DNSKEY 11, is re-signed with DNSKEY 1. At every instance, RRSIGs from the previous version of the zone can be verified with the DNSKEY RRSet from the current version and the other way around. The data from the current version can be verified with the data from the previous version of the zone. The duration of the "new DNSKEY" phase and the period between rollovers should be at least the Maximum Zone TTL. Making sure that the "new DNSKEY" phase lasts until the signature expiration time of the data in the initial version of the zone is recommended. This way all caches are cleared of the old signatures. However, this duration could be considerably longer than the Maximum Zone TTL, making the rollover a lengthy procedure. Note that in this example we assumed that the zone was not modified during the rollover. New data can be introduced in the zone as long Kolkman & Gieben Expires September 8, 2009 [Page 18] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 as it is signed with both keys. 4.2.1.3. Pros and Cons of the Schemes Pre-publish key rollover: This rollover does not involve signing the zone data twice. Instead, before the actual rollover, the new key is published in the key set and thus is available for cryptanalysis attacks. A small disadvantage is that this process requires four steps. Also the pre-publish scheme involves more parental work when used for KSK rollovers as explained in Section 4.2.3. Double signature ZSK rollover: The drawback of this signing scheme is that during the rollover the number of signatures in your zone doubles; this may be prohibitive if you have very big zones. An advantage is that it only requires three steps. 4.2.2. Key Signing Key Rollovers For the rollover of a Key Signing Key, the same considerations as for the rollover of a Zone Signing Key apply. However, we can use a double signature scheme to guarantee that old data (only the apex key set) in caches can be verified with a new key set and vice versa. Since only the key set is signed with a KSK, zone size considerations do not apply. Kolkman & Gieben Expires September 8, 2009 [Page 19] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 -------------------------------------------------------------------- initial new DNSKEY DS change DNSKEY removal -------------------------------------------------------------------- Parent: SOA0 --------> SOA1 --------> RRSIGpar(SOA0) --------> RRSIGpar(SOA1) --------> DS1 --------> DS2 --------> RRSIGpar(DS) --------> RRSIGpar(DS) --------> Child: SOA0 SOA1 --------> SOA2 RRSIG10(SOA0) RRSIG10(SOA1) --------> RRSIG10(SOA2) --------> DNSKEY1 DNSKEY1 --------> DNSKEY2 DNSKEY2 --------> DNSKEY10 DNSKEY10 --------> DNSKEY10 RRSIG1 (DNSKEY) RRSIG1 (DNSKEY) --------> RRSIG2 (DNSKEY) RRSIG2 (DNSKEY) --------> RRSIG10(DNSKEY) RRSIG10(DNSKEY) --------> RRSIG10(DNSKEY) -------------------------------------------------------------------- Stages of Deployment for a Double Signature Key Signing Key Rollover initial: Initial version of the zone. The parental DS points to DNSKEY1. Before the rollover starts, the child will have to verify what the TTL is of the DS RR that points to DNSKEY1 -- it is needed during the rollover and we refer to the value as TTL_DS. new DNSKEY: During the "new DNSKEY" phase, the zone administrator generates a second KSK, DNSKEY2. The key is provided to the parent, and the child will have to wait until a new DS RR has been generated that points to DNSKEY2. After that DS RR has been published on all servers authoritative for the parent's zone, the zone administrator has to wait at least TTL_DS to make sure that the old DS RR has expired from caches. DS change: The parent replaces DS1 with DS2. DNSKEY removal: DNSKEY1 has been removed. The scenario above puts the responsibility for maintaining a valid chain of trust with the child. It also is based on the premise that the parent only has one DS RR (per algorithm) per zone. An alternative mechanism has been considered. Using an established trust relation, the interaction can be performed in-band, and the removal of the keys by the child can possibly be signaled by the parent. In this mechanism, there are periods where there are two DS Kolkman & Gieben Expires September 8, 2009 [Page 20] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 RRs at the parent. Since at the moment of writing the protocol for this interaction has not been developed, further discussion is out of scope for this document. 4.2.3. Difference Between ZSK and KSK Rollovers Note that KSK rollovers and ZSK rollovers are different in the sense that a KSK rollover requires interaction with the parent (and possibly replacing of trust anchors) and the ensuing delay while waiting for it. A zone key rollover can be handled in two different ways: pre-publish (Section 4.2.1.1) and double signature (Section 4.2.1.2). As the KSK is used to validate the key set and because the KSK is not changed during a ZSK rollover, a cache is able to validate the new key set of the zone. The pre-publish method would also work for a KSK rollover. The records that are to be pre-published are the parental DS RRs. The pre-publish method has some drawbacks for KSKs. We first describe the rollover scheme and then indicate these drawbacks. -------------------------------------------------------------------- initial new DS new DNSKEY DS/DNSKEY removal -------------------------------------------------------------------- Parent: SOA0 SOA1 --------> SOA2 RRSIGpar(SOA0) RRSIGpar(SOA1) --------> RRSIGpar(SOA2) DS1 DS1 --------> DS2 DS2 --------> RRSIGpar(DS) RRSIGpar(DS) --------> RRSIGpar(DS) Child: SOA0 --------> SOA1 SOA1 RRSIG10(SOA0) --------> RRSIG10(SOA1) RRSIG10(SOA1) --------> DNSKEY1 --------> DNSKEY2 DNSKEY2 --------> DNSKEY10 --------> DNSKEY10 DNSKEY10 RRSIG1 (DNSKEY) --------> RRSIG2(DNSKEY) RRSIG2 (DNSKEY) RRSIG10(DNSKEY) --------> RRSIG10(DNSKEY) RRSIG10(DNSKEY) -------------------------------------------------------------------- Stages of Deployment for a Pre-Publish Key Signing Key Rollover When the child zone wants to roll, it notifies the parent during the "new DS" phase and submits the new key (or the corresponding DS) to Kolkman & Gieben Expires September 8, 2009 [Page 21] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 the parent. The parent publishes DS1 and DS2, pointing to DNSKEY1 and DNSKEY2, respectively. During the rollover ("new DNSKEY" phase), which can take place as soon as the new DS set propagated through the DNS, the child replaces DNSKEY1 with DNSKEY2. Immediately after that ("DS/DNSKEY removal" phase), it can notify the parent that the old DS record can be deleted. The drawbacks of this scheme are that during the "new DS" phase the parent cannot verify the match between the DS2 RR and DNSKEY2 using the DNS -- as DNSKEY2 is not yet published. Besides, we introduce a "security lame" key (see Section 4.4.3). Finally, the child-parent interaction consists of two steps. The "double signature" method only needs one interaction. 4.2.4. Key algorithm rollover [OK: The txt of this section is a strawman for the issue in: http:// www.nlnetlabs.nl/svn/rfc4641bis/trunk/open-issues/Key_algorithm_roll ] A special class of keyrollover is the rollover of key algorithms (either adding a new algorithm, removing an old algorithm, or both), additional steps are needed to retain integrity during the rollover. Because of the algorithm downgrade protection in RFC4035 section 2.2, you may not have a key of an algorithm for which you do not have signatures. When adding a new algorithm, the signatures should be added first. After the TTL has expired, and caches have dropped the old data covered by those signatures, the DNSKEY with the new algorithm can be added. When removing an old algorithm, the DNSKEY should be removed first. To do both, the following steps can be used. For simplicity, we use a zone that is only signed by one zone signing key. Kolkman & Gieben Expires September 8, 2009 [Page 22] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 ---------------------------------------------------------------- 1 Initial 2 New RRSIGS 3 New DNSKEY ---------------------------------------------------------------- SOA0 SOA1 SOA2 RRSIG1(SOA0) RRSIG1(SOA1) RRSIG1(SOA2) RRSIG2(SOA1) RRSIG2(SOA2) DNSKEY1 DNSKEY1 DNSKEY1 RRSIG1(DNSKEY) RRSIG1(DNSKEY) DNSKEY2 RRSIG2(DNSKEY) RRSIG1(DNSKEY) RRSIG2(DNSKEY) ---------------------------------------------------------------- 4 Remove DNSKEY 5 Remove RRSIGS ---------------------------------------------------------------- SOA3 SOA4 RRSIG1(SOA3) RRSIG2(SOA4) RRSIG2(SOA3) DNSKEY2 DNSKEY2 RRSIG1(DNSKEY) RRSIG2(DNSKEY) RRSIG2(DNSKEY) ---------------------------------------------------------------- Stages of Deployment during an Algorithm Rollover. In step 2, the signatures for the new key are added, but the key itself is not. While in theory, the signatures of the keyset should always be synchronized with the keyset itself, it can be possible that RRSIGS are requested separately, so it might be prudent to also sign the DNSKEY set with the new signature. After the cache data has expired, the new key can be added to the zone, as done in step 3. The next step is to remove the old algorithm. This time the key needs to be removed first, before removing the signatures. The key is removed in step 4, and after the cache data has expired, the signatures can be removed in step 5. The above steps ensure that during the rollover to a new algorithm, the integrity of the zone is never broken. 4.2.5. Automated Key Rollovers As keys must be renewed periodically, there is some motivation to automate the rollover process. Consider the following: Kolkman & Gieben Expires September 8, 2009 [Page 23] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 o ZSK rollovers are easy to automate as only the child zone is involved. o A KSK rollover needs interaction between parent and child. Data exchange is needed to provide the new keys to the parent; consequently, this data must be authenticated and integrity must be guaranteed in order to avoid attacks on the rollover. 4.3. Planning for Emergency Key Rollover This section deals with preparation for a possible key compromise. Our advice is to have a documented procedure ready for when a key compromise is suspected or confirmed. When the private material of one of your keys is compromised it can be used for as long as a valid trust chain exists. A trust chain remains intact for o as long as a signature over the compromised key in the trust chain is valid, o as long as a parental DS RR (and signature) points to the compromised key, o as long as the key is anchored in a resolver and is used as a starting point for validation (this is generally the hardest to update). While a trust chain to your compromised key exists, your namespace is vulnerable to abuse by anyone who has obtained illegitimate possession of the key. Zone operators have to make a trade-off if the abuse of the compromised key is worse than having data in caches that cannot be validated. If the zone operator chooses to break the trust chain to the compromised key, data in caches signed with this key cannot be validated. However, if the zone administrator chooses to take the path of a regular rollover, the malicious key holder can spoof data so that it appears to be valid. 4.3.1. KSK Compromise A zone containing a DNSKEY RRSet with a compromised KSK is vulnerable as long as the compromised KSK is configured as trust anchor or a parental DS points to it. A compromised KSK can be used to sign the key set of an attacker's zone. That zone could be used to poison the DNS. Therefore, when the KSK has been compromised, the trust anchor or the Kolkman & Gieben Expires September 8, 2009 [Page 24] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 parental DS should be replaced as soon as possible. It is local policy whether to break the trust chain during the emergency rollover. The trust chain would be broken when the compromised KSK is removed from the child's zone while the parent still has a DS pointing to the compromised KSK (the assumption is that there is only one DS at the parent. If there are multiple DSes this does not apply -- however the chain of trust of this particular key is broken). Note that an attacker's zone still uses the compromised KSK and the presence of a parental DS would cause the data in this zone to appear as valid. Removing the compromised key would cause the attacker's zone to appear as valid and the child's zone as Bogus. Therefore, we advise not to remove the KSK before the parent has a DS to a new KSK in place. 4.3.1.1. Keeping the Chain of Trust Intact If we follow this advice, the timing of the replacement of the KSK is somewhat critical. The goal is to remove the compromised KSK as soon as the new DS RR is available at the parent. And also make sure that the signature made with a new KSK over the key set with the compromised KSK in it expires just after the new DS appears at the parent, thus removing the old cruft in one swoop. The procedure is as follows: 1. Introduce a new KSK into the key set, keep the compromised KSK in the key set. 2. Sign the key set, with a short validity period. The validity period should expire shortly after the DS is expected to appear in the parent and the old DSes have expired from caches. 3. Upload the DS for this new key to the parent. 4. Follow the procedure of the regular KSK rollover: Wait for the DS to appear in the authoritative servers and then wait as long as the TTL of the old DS RRs. If necessary re-sign the DNSKEY RRSet and modify/extend the expiration time. 5. Remove the compromised DNSKEY RR from the zone and re-sign the key set using your "normal" validity interval. An additional danger of a key compromise is that the compromised key could be used to facilitate a legitimate DNSKEY/DS rollover and/or nameserver changes at the parent. When that happens, the domain may be in dispute. An authenticated out-of-band and secure notify mechanism to contact a parent is needed in this case. Kolkman & Gieben Expires September 8, 2009 [Page 25] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 Note that this is only a problem when the DNSKEY and or DS records are used for authentication at the parent. 4.3.1.2. Breaking the Chain of Trust There are two methods to break the chain of trust. The first method causes the child zone to appear 'Bogus' to validating resolvers. The other causes the child zone to appear 'insecure'. These are described below. In the method that causes the child zone to appear 'Bogus' to validating resolvers, the child zone replaces the current KSK with a new one and re-signs the key set. Next it sends the DS of the new key to the parent. Only after the parent has placed the new DS in the zone is the child's chain of trust repaired. An alternative method of breaking the chain of trust is by removing the DS RRs from the parent zone altogether. As a result, the child zone would become insecure. 4.3.2. ZSK Compromise Primarily because there is no parental interaction required when a ZSK is compromised, the situation is less severe than with a KSK compromise. The zone must still be re-signed with a new ZSK as soon as possible. As this is a local operation and requires no communication between the parent and child, this can be achieved fairly quickly. However, one has to take into account that just as with a normal rollover the immediate disappearance of the old compromised key may lead to verification problems. Also note that as long as the RRSIG over the compromised ZSK is not expired the zone may be still at risk. 4.3.3. Compromises of Keys Anchored in Resolvers A key can also be pre-configured in resolvers. For instance, if DNSSEC is successfully deployed the root key may be pre-configured in most security aware resolvers. If trust-anchor keys are compromised, the resolvers using these keys should be notified of this fact. Zone administrators may consider setting up a mailing list to communicate the fact that a SEP key is about to be rolled over. This communication will of course need to be authenticated, e.g., by using digital signatures. End-users faced with the task of updating an anchored key should always validate the new key. New keys should be authenticated out- of-band, for example, through the use of an announcement website that Kolkman & Gieben Expires September 8, 2009 [Page 26] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 is secured using secure sockets (TLS) [23]. 4.4. Parental Policies 4.4.1. Initial Key Exchanges and Parental Policies Considerations The initial key exchange is always subject to the policies set by the parent. When designing a key exchange policy one should take into account that the authentication and authorization mechanisms used during a key exchange should be as strong as the authentication and authorization mechanisms used for the exchange of delegation information between parent and child. That is, there is no implicit need in DNSSEC to make the authentication process stronger than it was in DNS. Using the DNS itself as the source for the actual DNSKEY material, with an out-of-band check on the validity of the DNSKEY, has the benefit that it reduces the chances of user error. A DNSKEY query tool can make use of the SEP bit [5] to select the proper key from a DNSSEC key set, thereby reducing the chance that the wrong DNSKEY is sent. It can validate the self-signature over a key; thereby verifying the ownership of the private key material. Fetching the DNSKEY from the DNS ensures that the chain of trust remains intact once the parent publishes the DS RR indicating the child is secure. Note: the out-of-band verification is still needed when the key material is fetched via the DNS. The parent can never be sure whether or not the DNSKEY RRs have been spoofed. 4.4.2. Storing Keys or Hashes? When designing a registry system one should consider which of the DNSKEYs and/or the corresponding DSes to store. Since a child zone might wish to have a DS published using a message digest algorithm not yet understood by the registry, the registry can't count on being able to generate the DS record from a raw DNSKEY. Thus, we recommend that registry systems at least support storing DS records. It may also be useful to store DNSKEYs, since having them may help during troubleshooting and, as long as the child's chosen message digest is supported, the overhead of generating DS records from them is minimal. Having an out-of-band mechanism, such as a registry directory (e.g., Whois), to find out which keys are used to generate DS Resource Records for specific owners and/or zones may also help with troubleshooting. The storage considerations also relate to the design of the customer interface and the method by which data is transferred between Kolkman & Gieben Expires September 8, 2009 [Page 27] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 registrant and registry; Will the child zone administrator be able to upload DS RRs with unknown hash algorithms or does the interface only allow DNSKEYs? In the registry-registrar model, one can use the DNSSEC extensions to the Extensible Provisioning Protocol (EPP) [15], which allows transfer of DS RRs and optionally DNSKEY RRs. 4.4.3. Security Lameness Security lameness is defined as what happens when a parent has a DS RR pointing to a non-existing DNSKEY RR. When this happens, the child's zone may be marked "Bogus" by verifying DNS clients. As part of a comprehensive delegation check, the parent could, at key exchange time, verify that the child's key is actually configured in the DNS. However, if a parent does not understand the hashing algorithm used by child, the parental checks are limited to only comparing the key id. Child zones should be very careful in removing DNSKEY material, specifically SEP keys, for which a DS RR exists. Once a zone is "security lame", a fix (e.g., removing a DS RR) will take time to propagate through the DNS. 4.4.4. DS Signature Validity Period Since the DS can be replayed as long as it has a valid signature, a short signature validity period over the DS minimizes the time a child is vulnerable in the case of a compromise of the child's KSK(s). A signature validity period that is too short introduces the possibility that a zone is marked "Bogus" in case of a configuration error in the signer. There may not be enough time to fix the problems before signatures expire. Something as mundane as operator unavailability during weekends shows the need for DS signature validity periods longer than 2 days. We recommend an absolute minimum for a DS signature validity period of a few days. The maximum signature validity period of the DS record depends on how long child zones are willing to be vulnerable after a key compromise. On the other hand, shortening the DS signature validity interval increases the operational risk for the parent. Therefore, the parent may have policy to use a signature validity interval that is considerably longer than the child would hope for. A compromise between the operational constraints of the parent and minimizing damage for the child may result in a DS signature validity period somewhere between a week and months. Kolkman & Gieben Expires September 8, 2009 [Page 28] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 In addition to the signature validity period, which sets a lower bound on the number of times the zone owner will need to sign the zone data and which sets an upper bound to the time a child is vulnerable after key compromise, there is the TTL value on the DS RRs. Shortening the TTL means that the authoritative servers will see more queries. But on the other hand, a short TTL lowers the persistence of DS RRSets in caches thereby increasing the speed with which updated DS RRSets propagate through the DNS. 4.4.5. (Non) Cooperating Registrars [OK: this is a first strawman, and is intended to start the discussion of the issue. By no means this is intended to be a final text.] The parent-child relation is often described in terms of a (thin) registry model. Where a registry maintains the parent zone, and the registrant (the user of the child-domain name), deals with the registry through an intermediary called a registrar. (See [12] for a comprehensive definition). Registrants may out-source the maintenance of their DNS system, including the maintenance of DNSSEC key material, to the registrar or to another third party. The entity that has control over the DNS zone and its keys may prevent the registrant to make a timely move to a different registrar. [OK: I use the term registrar below while it is the operator of the DNS zone who is the actual culprit. For instance, the case also applies when a registrant passes a zone to another registrant. Should I just use "DNS Administrator"?] Suppose that the registrant wants to move from losing registrar A to gaining registrar B. Let us first look what would happen in a cooperative environment. The assumption is that registrar A will not hand off any private key material to registrar B because that would be a trivial case. In a cooperating environment one could proceed with a pre-publish ZSK rollover whereby registrar A pre-publishes the ZSK of registrar B, combined with a double signature KSK rollover where the two registrars exchange public keys and independently generate a signature over the keysets that they combine and both publish in the zone. In the non-cooperative case matters are more complicated. The loosing registrar A may not cooperate and leave the data in the DNS as is. In the extreme case registrar A may become obstructive and publish a DNSKEY RR with a high TTL and corresponding signature validity so that registrar A's DNSKEY, would end up in caches for, in theory, tens of years. Kolkman & Gieben Expires September 8, 2009 [Page 29] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 The problem arises when a validator tries to validate with A's key and there is no signature material produced with Registrars A available in the delegation path after redelegation from registrar A to registrar B has taken place. One could imagine a rollover scenario where registrar B pulls all RRSIGs created by registar A and publishes those in conjunction with its own signatures, but that would not allow any changes in the zone content. Since a redelegation took place the NS RRset has -- per definition-- changed so such rollover scenario will not work. Besides if zone transfers are not allowed by A and NSEC3 is deployed in the A's zone then registrar B will not have certainty that all of A's RRSIGs are transfered. The only viable option for the registrant is to publish its zone unsigned and ask the registry to remove the DS pointing to registrar A for as long as the DNSKEY of registrar A, or any of the signatures produced by registrar A are likely to appear in caches, which as mentioned above could in theory be for tens of years. [OK: Some implementations limit the time data is cached. Although that is not a protocol requirement (and may even be considered a protocol violation) it seems that that practice may limit the impact of this problem, is that worth mentioning?] [OK: This is really the point that I'm trying to make, is the above text needed?] There is no operational methodology to work around this business issue and proper contractual relations ships between registrants and their registrars seem to be the only solution to cope with these problems. 5. Security Considerations DNSSEC adds data integrity to the DNS. This document tries to assess the operational considerations to maintain a stable and secure DNSSEC service. Not taking into account the 'data propagation' properties in the DNS will cause validation failures and may make secured zones unavailable to security-aware resolvers. 6. IANA considerations There are no IANA considerations with respect to this document 7. Acknowledgments Most of the text of this document is copied from RFC4641 [16] people involved in that work were in random order: Rip Loomis, Olafur Gudmundsson, Wesley Griffin, Michael Richardson, Scott Rose, Rick van Rein, Tim McGinnis, Gilles Guette Olivier Courtay, Sam Weiler, Jelte Jansen, Niall O'Reilly, Holger Zuleger, Ed Lewis, Hilarie Orman, Kolkman & Gieben Expires September 8, 2009 [Page 30] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 Marcos Sanz, Peter Koch, Mike StJohns, Emmar Bretherick, Adrian Bedford, and Lindy Foster, G. Guette, and O. Courtay. For this version of the document we would like to acknowldge: o Paul Hoffman for his contribution on the choice of cryptographic paramenters and addressing some of the trust anchor issues. o Jelte Jansen provided the text in Section 4.2.4 8. References 8.1. Normative References [1] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, November 1987. [2] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [3] Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, March 2005. [4] Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "Resource Records for the DNS Security Extensions", RFC 4034, March 2005. [5] Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "Protocol Modifications for the DNS Security Extensions", RFC 4035, March 2005. 8.2. Informative References [6] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [7] Ohta, M., "Incremental Zone Transfer in DNS", RFC 1995, August 1996. [8] Vixie, P., "A Mechanism for Prompt Notification of Zone Changes (DNS NOTIFY)", RFC 1996, August 1996. [9] Andrews, M., "Negative Caching of DNS Queries (DNS NCACHE)", RFC 2308, March 1998. [10] Eastlake, D., "DNS Security Operational Considerations", RFC 2541, March 1999. Kolkman & Gieben Expires September 8, 2009 [Page 31] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 [11] Wellington, B., "Secure Domain Name System (DNS) Dynamic Update", RFC 3007, November 2000. [12] Hollenbeck, S., "Generic Registry-Registrar Protocol Requirements", RFC 3375, September 2002. [13] Orman, H. and P. Hoffman, "Determining Strengths For Public Keys Used For Exchanging Symmetric Keys", BCP 86, RFC 3766, April 2004. [14] Eastlake, D., Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, June 2005. [15] Hollenbeck, S., "Domain Name System (DNS) Security Extensions Mapping for the Extensible Provisioning Protocol (EPP)", RFC 4310, December 2005. [16] Kolkman, O. and R. Gieben, "DNSSEC Operational Practices", RFC 4641, September 2006. [17] Shirey, R., "Internet Security Glossary, Version 2", RFC 4949, August 2007. [18] StJohns, M., "Automated Updates of DNS Security (DNSSEC) Trust Anchors", RFC 5011, September 2007. [19] Rose, S., "NIST DNSSEC workshop notes", , June 2001. [20] Barker, E. and J. Kelsey, "Recommendation for Random Number Generation Using Deterministic Random Bit Generators (Revised)", Nist Special Publication 800-90, March 2007. [21] Jansen, J., "Use of SHA-2 algorithms with RSA in DNSKEY and RRSIG Resource Records for DNSSEC", draft-ietf-dnsext-dnssec-rsasha256-05 (work in progress), July 2008. [22] Hardaker, W., "Use of SHA-256 in DNSSEC Delegation Signer (DS) Resource Records (RRs)", RFC 4509, May 2006. [23] Blake-Wilson, S., Nystrom, M., Hopwood, D., Mikkelsen, J., and T. Wright, "Transport Layer Security (TLS) Extensions", RFC 4366, April 2006. Appendix A. Terminology In this document, there is some jargon used that is defined in other documents. In most cases, we have not copied the text from the Kolkman & Gieben Expires September 8, 2009 [Page 32] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 documents defining the terms but have given a more elaborate explanation of the meaning. Note that these explanations should not be seen as authoritative. Anchored key: A DNSKEY configured in resolvers around the globe. This key is hard to update, hence the term anchored. Bogus: Also see Section 5 of [3]. An RRSet in DNSSEC is marked "Bogus" when a signature of an RRSet does not validate against a DNSKEY. Key Signing Key or KSK: A Key Signing Key (KSK) is a key that is used exclusively for signing the apex key set. The fact that a key is a KSK is only relevant to the signing tool. Key size: The term 'key size' can be substituted by 'modulus size' throughout the document. It is mathematically more correct to use modulus size, but as this is a document directed at operators we feel more at ease with the term key size. Private and public keys: DNSSEC secures the DNS through the use of public key cryptography. Public key cryptography is based on the existence of two (mathematically related) keys, a public key and a private key. The public keys are published in the DNS by use of the DNSKEY Resource Record (DNSKEY RR). Private keys should remain private. Key rollover: A key rollover (also called key supercession in some environments) is the act of replacing one key pair with another at the end of a key effectivity period. Secure Entry Point (SEP) key: A KSK that has a parental DS record pointing to it or is configured as a trust anchor. Although not required by the protocol, we recommend that the SEP flag [5] is set on these keys. Self-signature: This only applies to signatures over DNSKEYs; a signature made with DNSKEY x, over DNSKEY x is called a self- signature. Note: without further information, self-signatures convey no trust. They are useful to check the authenticity of the DNSKEY, i.e., they can be used as a hash. Singing the zone file: The term used for the event where an administrator joyfully signs its zone file while producing melodic sound patterns. Kolkman & Gieben Expires September 8, 2009 [Page 33] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 Signer: The system that has access to the private key material and signs the Resource Record sets in a zone. A signer may be configured to sign only parts of the zone, e.g., only those RRSets for which existing signatures are about to expire. Zone Signing Key (ZSK): A key that is used for signing all data in a zone (except, perhaps, the DNSKEY RRSet). The fact that a key is a ZSK is only relevant to the signing tool. Zone administrator: The 'role' that is responsible for signing a zone and publishing it on the primary authoritative server. Appendix B. Zone Signing Key Rollover How-To Using the pre-published signature scheme and the most conservative method to assure oneself that data does not live in caches, here follows the "how-to". Step 0: The preparation: Create two keys and publish both in your key set. Mark one of the keys "active" and the other "published". Use the "active" key for signing your zone data. Store the private part of the "published" key, preferably off-line. The protocol does not provide for attributes to mark a key as active or published. This is something you have to do on your own, through the use of a notebook or key management tool. Step 1: Determine expiration: At the beginning of the rollover make a note of the highest expiration time of signatures in your zone file created with the current key marked as active. Wait until the expiration time marked in Step 1 has passed. Step 2: Then start using the key that was marked "published" to sign your data (i.e., mark it "active"). Stop using the key that was marked "active"; mark it "rolled". Step 3: It is safe to engage in a new rollover (Step 1) after at least one signature validity period. Appendix C. Typographic Conventions The following typographic conventions are used in this document: Key notation: A key is denoted by DNSKEYx, where x is a number or an identifier, x could be thought of as the key id. Kolkman & Gieben Expires September 8, 2009 [Page 34] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 RRSet notations: RRs are only denoted by the type. All other information -- owner, class, rdata, and TTL -- is left out. Thus: "example.com 3600 IN A 192.0.2.1" is reduced to "A". RRSets are a list of RRs. A example of this would be "A1, A2", specifying the RRSet containing two "A" records. This could again be abbreviated to just "A". Signature notation: Signatures are denoted as RRSIGx(RRSet), which means that RRSet is signed with DNSKEYx. Zone representation: Using the above notation we have simplified the representation of a signed zone by leaving out all unnecessary details such as the names and by representing all data by "SOAx" SOA representation: SOAs are represented as SOAx, where x is the serial number. Using this notation the following signed zone: Kolkman & Gieben Expires September 8, 2009 [Page 35] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 example.net. 86400 IN SOA ns.example.net. bert.example.net. ( 2006022100 ; serial 86400 ; refresh ( 24 hours) 7200 ; retry ( 2 hours) 3600000 ; expire (1000 hours) 28800 ) ; minimum ( 8 hours) 86400 RRSIG SOA 5 2 86400 20130522213204 ( 20130422213204 14 example.net. cmL62SI6iAX46xGNQAdQ... ) 86400 NS a.example.net. 86400 NS b.example.net. 86400 RRSIG NS 5 2 86400 20130507213204 ( 20130407213204 14 example.net. SO5epiJei19AjXoUpFnQ ... ) 86400 DNSKEY 256 3 5 ( EtRB9MP5/AvOuVO0I8XDxy0... ) ; id = 14 86400 DNSKEY 257 3 5 ( gsPW/Yy19GzYIY+Gnr8HABU... ) ; id = 15 86400 RRSIG DNSKEY 5 2 86400 20130522213204 ( 20130422213204 14 example.net. J4zCe8QX4tXVGjV4e1r9... ) 86400 RRSIG DNSKEY 5 2 86400 20130522213204 ( 20130422213204 15 example.net. keVDCOpsSeDReyV6O... ) 86400 RRSIG NSEC 5 2 86400 20130507213204 ( 20130407213204 14 example.net. obj3HEp1GjnmhRjX... ) a.example.net. 86400 IN TXT "A label" 86400 RRSIG TXT 5 3 86400 20130507213204 ( 20130407213204 14 example.net. IkDMlRdYLmXH7QJnuF3v... ) 86400 NSEC b.example.com. TXT RRSIG NSEC 86400 RRSIG NSEC 5 3 86400 20130507213204 ( 20130407213204 14 example.net. bZMjoZ3bHjnEz0nIsPMM... ) ... is reduced to the following representation: SOA2006022100 RRSIG14(SOA2006022100) DNSKEY14 DNSKEY15 RRSIG14(KEY) RRSIG15(KEY) The rest of the zone data has the same signature as the SOA record, Kolkman & Gieben Expires September 8, 2009 [Page 36] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 i.e., an RRSIG created with DNSKEY 14. Appendix D. Document Editing History [To be removed prior to publication as an RFC] D.1. draft-ietf-dnsop-rfc4641-00 Version 0 was differs from RFC4641 in the following ways. o Status of this memo appropriate for I-D o TOC formatting differs. o Whitespaces, linebreaks, and pagebreaks may be slightly different because of xml2rfc generation. o References slightly reordered. o Applied the errata from http://www.rfc-editor.org/errata_search.php?rfc=4641 o Inserted trivial "IANA considertations" section. In other words it should not contain substantive changes in content as intended by the workinggroup for the original RFC4641. D.2. version 0->1 Cryptography details rewritten. (See http://www.nlnetlabs.nl/svn/ rfc4641bis/trunk/open-issues/cryptography_flawed) o Reference to NIST 800-90 added o RSA/SHA256 is being recommended in addition to RSA/SHA1. o Complete rewrite of Section 3.5 removing the table and suggesting a keysize of 1024 for keys in use for less than 8 years, issued up to at least 2015. o Replaced the reference to Schneiers' applied cryptograpy with a reference to RFC4949. o Removed the KSK for high level zones consideration Applied some differentiation with respect of the use of a KSK for parent or trust-anchor relation http://www.nlnetlabs.nl/svn/ rfc4641bis/trunk/open-issues/differentiation_trustanchor_parent Kolkman & Gieben Expires September 8, 2009 [Page 37] Internet-Draft DNSSEC Operational Practices, Version 2 March 2009 http://www.nlnetlabs.nl/svn/rfc4641bis/trunk/open-issues/ rollover_assumptions Added Section 4.2.4 as suggested by Jelte Jansen in http:// www.nlnetlabs.nl/svn/rfc4641bis/trunk/open-issues/Key_algorithm_roll Added Section 4.4.5 Issue identified by Antoin Verschuur http:// www.nlnetlabs.nl/svn/rfc4641bis/trunk/open-issues/ non-cooperative-registrars In Appendix A: ZSK does not nescessarily sign the DNSKEY RRset. Id: draft-ietf-dnsop-rfc4641bis-01.txt 28 2009-03-06 14:03:57Z olaf Authors' Addresses Olaf M. Kolkman NLnet Labs Kruislaan 419 Amsterdam 1098 VA The Netherlands EMail: olaf@nlnetlabs.nl URI: http://www.nlnetlabs.nl Miek Gieben EMail: miek@miek.nl Kolkman & Gieben Expires September 8, 2009 [Page 38]