Release notes: Version BudiiLite1300

Installation Instruction:

1. Open up a web browser.
2. type in http://10.1.1.1 into the address field of your web browser.
3. Enter in your modems password (Default is admin).
4. Navigated to "Handy Tools".
5. Select Continue under the Firmware upgrade section.
6. Browse to the location that you have saved firmware file name "BudiiLite_nand_fs_image_128_1300.bin".
7. Select the firmware.
8. Select Upgrade firmware.

Note: It will take around 3-5 minutes for the firmware upgrade to complete and for Budii Lite to come back on line.  

A factory restore should not be required after doing the upgrade, however if you find that you are still having problems after the upgrade; we recommend that you should proceed with a factory restore and enter in all your custom settings again.



Fixes:

-	The reset button in phone mapping changes the current settings if save settings has not been selected 

-	The LED should be on after disable auto scan DSL wan interface 

-	Test 6rd with test-ipv6.com will cause DUT hang.              

-	Internet schedule rule - Add the ability to have multiple rules for the same IP on whole week.        

-	After changing the DUT to a different IP; the DHCP table still shows all old DHCP IP's.       

-	VPN add a button to force a connection and add a status that shows if the tunnel is up or down.        

-	Add wpa mode option wpa only,wpa2 only, wpa/wpa2  

-	If setup VLAN's - allow to port forward to IP's that are not the default VLAN?                

-	Mac OS unable able to access samba

-	Cannot access usb when there are two usb device plugged         

-	dlna access too lager folder will cause server to hang after a few hours             

-	Add an Edit option to allow for existing internet schedule rules to be modified.  

-	Multi-usb device not accessible