Implements read/write lock symantics.
More...
#include <ReadWriteLock.hh>
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, const char *Filename, int Linenum) |
| | Constructor.
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, bool TryLock, const char *Filename, int Linenum) |
| | Constructor.
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, int Timeout, const char *Filename, int Linenum) |
| | Constructor.
|
|
virtual | ~ReadWriteLock () |
| | Destructor.
|
| void | Modify (mode_type Mode, const char *Filename, int Linenum) |
| | Modify the mode of lock being held on the resource.
|
| void | Release (const char *Filename, int Linenum) |
| | Release the lock.
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, const char *Filename, int Linenum) |
| | Constructor.
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, bool TryLock, const char *Filename, int Linenum) |
| | Constructor.
|
| | ReadWriteLock (baton_type Lock, mode_type Mode, int Timeout, const char *Filename, int Linenum) |
| | Constructor.
|
|
virtual | ~ReadWriteLock () |
| | Destructor.
|
| void | Modify (mode_type Mode, const char *Filename, int Linenum) |
| | Modify the mode of lock being held on the resource.
|
| void | Release (const char *Filename, int Linenum) |
| | Release the lock.
|
|
|
static baton_type | Baton () |
| | Create a baton that is appropriate for use with this class.
|
| static void | ThreadCancel (void *VLock) |
| | Handler for thead cancelation.
|
|
static baton_type | Baton () |
| | Create a baton that is appropriate for use with this class.
|
| static void | ThreadCancel (void *VLock) |
| | Handler for thead cancelation.
|
Implements read/write lock symantics.
This class provides proper garbage collection of system resource used to implement thread safe read/write locks.
void
threaded_func()
{
__FILE__, __LINE__ );
...
}
◆ lock_mode [1/2]
Lock mode.
| Enumerator |
|---|
| READ | < Initial mode
|
| WRITE | < Read lock allows multiple concurrent reads.
|
| READ | < Initial mode
|
| WRITE | < Read lock allows multiple concurrent reads.
|
◆ lock_mode [2/2]
Lock mode.
| Enumerator |
|---|
| READ | < Initial mode
|
| WRITE | < Read lock allows multiple concurrent reads.
|
| READ | < Initial mode
|
| WRITE | < Read lock allows multiple concurrent reads.
|
◆ lock_state [1/2]
Lock state.
| Enumerator |
|---|
| PENDING | < Initial state
|
| ACTIVE | < Lock requested
|
| PENDING | < Initial state
|
| ACTIVE | < Lock requested
|
◆ lock_state [2/2]
Lock state.
| Enumerator |
|---|
| PENDING | < Initial state
|
| ACTIVE | < Lock requested
|
| PENDING | < Initial state
|
| ACTIVE | < Lock requested
|
◆ ReadWriteLock() [1/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ReadWriteLock() [2/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
bool | TryLock, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | TryLock | If true, then return immediately wether or not the lock was obtained. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ReadWriteLock() [3/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
int | Timeout, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | Timeout | Time limit in seconds in which to acquire the lock. A value of zero (0) indicates that the method should wait until the lock is granted. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ReadWriteLock() [4/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ReadWriteLock() [5/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
bool | TryLock, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | TryLock | If true, then return immediately wether or not the lock was obtained. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ReadWriteLock() [6/6]
| LDASTools::AL::ReadWriteLock::ReadWriteLock |
( |
baton_type | Lock, |
|
|
mode_type | Mode, |
|
|
int | Timeout, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Constructor.
- Parameters
-
| [in] | Lock | Baton controlling access to the resource. |
| [in] | Mode | Any of the lock_modes. |
| [in] | Timeout | Time limit in seconds in which to acquire the lock. A value of zero (0) indicates that the method should wait until the lock is granted. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ Modify() [1/2]
| void LDASTools::AL::ReadWriteLock::Modify |
( |
mode_type | Mode, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Modify the mode of lock being held on the resource.
- Parameters
-
| [in] | Mode | The new mode to be held on the resource. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ Modify() [2/2]
| void LDASTools::AL::ReadWriteLock::Modify |
( |
mode_type | Mode, |
|
|
const char * | Filename, |
|
|
int | Linenum ) |
Modify the mode of lock being held on the resource.
- Parameters
-
| [in] | Mode | The new mode to be held on the resource. |
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ Release() [1/2]
| void LDASTools::AL::ReadWriteLock::Release |
( |
const char * | Filename, |
|
|
int | Linenum ) |
Release the lock.
- Parameters
-
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ Release() [2/2]
| void LDASTools::AL::ReadWriteLock::Release |
( |
const char * | Filename, |
|
|
int | Linenum ) |
Release the lock.
- Parameters
-
| [in] | File | The filename from where the call was made. |
| [in] | Line | The line number from where the call was made. |
◆ ThreadCancel() [1/2]
| void LDASTools::AL::ReadWriteLock::ThreadCancel |
( |
void * | VLock | ) |
|
|
static |
Handler for thead cancelation.
- Parameters
-
| [in] | VLock | The VLock is a pointer to a ReadWriteLock object that holds a lock. |
◆ ThreadCancel() [2/2]
| void LDASTools::AL::ReadWriteLock::ThreadCancel |
( |
void * | VLock | ) |
|
|
static |
Handler for thead cancelation.
- Parameters
-
| [in] | VLock | The VLock is a pointer to a ReadWriteLock object that holds a lock. |
The documentation for this class was generated from the following files:
- /home/abuild/rpmbuild/BUILD/ldas-tools-al-2.6.7-build/ldas-tools-al-2.6.7/build/include/ldastoolsal/ReadWriteLock.hh
- /home/abuild/rpmbuild/BUILD/ldas-tools-al-2.6.7-build/ldas-tools-al-2.6.7/src/ReadWriteLock.hh
- /home/abuild/rpmbuild/BUILD/ldas-tools-al-2.6.7-build/ldas-tools-al-2.6.7/src/ReadWriteLock.cc